|
|
| Step
2: Cut out existing soffit vents,
re-secure 2x4 nailer's as needed, cut to width Hardie
Soffit Vents. |
|
|
|
STEP
3: Nail
and secure Hardie Vented Soffit Board, caulk
using exterior white or matching, color match
paint using existing soffit paint chip at any
local paint supplier.
|
|
James
Hardie Soffit Vent
Installations brought to you by: LR HOME
SOLUTIONS LLC
|
This is a full roof
ventilation system detailed by each step. Note: You will
get insulation all over the place when you start cutting
out the existing, recommend using shop vacuum to keep
things clean.
This Soffit vent is the
only way to vent your attic fully, little vents, are not
enough
with
out air intake there is no air out take.
A properly insulated
and ventilated roof will save you thousands of dollars!
This will prolong roof life cycle replacement costs,
which means a 20 year roof will have a much better
chance to survive in this Texas heat
The heat in these Texas
attics is unbearable and these problems in each and
every home in the DFW need to be corrected. ....more...
|
