Copper Bay Windows - Copper Flashings - Copper Craftsmen

Copper bay windows by LR Home Solutions LLC

When doing a copper bay window. We suggest using 16oz soft copper sheets. Each piece should be manufactured on site to an exact fit

A true copper double lock standing seam is manufactured by hand using a hand angle iron that stands 1 1/4" on one side and 1" on the other side. Allowing the craftsmen to use the iron to make the bends in the seam. Bending 1/4" over the pan next to it and folding again using the 1" side to create the second fold. The seam is then beat tight with the iron and hammer. This is a true double lock copper stand seam bay window done according to SMCA (sheet metal contractors associations)

All corners are folded using hand benders. Pin holes are then soldered using flux and solder

Copper Bay Window Prices:

Standard installation prices for a copper bay window as seen above shouldn't exceed 950.00 per bay window

That's based on 2 sheets of 3x8 copper. Brick copper counter flashings installed add an additional sheet of copper and additional labor costs

Arched or curved bay windows additional

Larger copper bay windows exceeding 2 sheets of copper are estimated on site

An alternative choice to a copper bay window as seen below

ALUMINUM BAY WINDOW ROOF

ALUMINUM ROOF BAY WINDOW

We pride ourselves on our abilities to stand above the rest. With the problems most are having here in Dallas with shingle roofing over their bay windows due to the amount of pieces in general needed to complete the bay window. We have chosen to use standard stock sheets of aluminum to manufacture on site an alternative to the hundreds of pieces it takes to do a bay window in shingles

As seen above this bay window only needed 10 shown panels to complete this bay window. Less pieces means less chance for wind blown rains to get to the bay window and leak into the house

When copper is not "appropriate for the neighborhood" or when its a bay window located on the back of the house. We suggest an Aluminum Bay window instead

Aluminum Bay Window Costs:

Average price for our aluminum bay window roof system is $450.00 installed. Aluminum included

Standard Installation:

Remove existing shingle roof and associated flashings

Install weather guard rain protector directly on plywood

Install Aluminum panels

Single lock seem with crimped connectors as needed

Seal corners

New counter flashings, cut into new riglets over the existing flashing height to eliminate any existing mess left by the previous installation

General Roofing Services and Repairs:

Residential Roofing Systems:

• Asphalt Shingles: All types and all manufacturers, residential shingle specialists, hail damage, storm damage, insurance claim specialists. Shingle repairs. Leak Detection and Repairs. Full Tear off and replacement specialists specializing in residential roofing restoration and repair

• Cedar Shake: Roofing Systems, replacement and cedar shake roofing repairs, cedar shake roof preservation and salvaging. Also considered Wood Shakes or wood shingles. Perfection shakes, medium grade to heavy cedar wood shakes

• Slate Roofs: True Master Slater's using old style hammer and Slater's bar techniques. Slate Repairs and complete slate roof installations

• Metal Roofs: specializing in new installations, renovations, bay windows, copper roof systems, hand crafted copper roofs. Today's leading pre-fab systems fully manufactured and installed. Both commercial and residential metal roofing systems. Copper Bay Windows

                      Please visit our Metal Roofing Site:

• Tile Roofing: Systems, from adhered to screwed down and mudded systems, flat or barrel tile roofing systems. New construction and or repairs.

• Historically: Correct metal roof systems and flashings. True Tinner's using 15 and 20 lb tin. Hand Crafted pans. Assorted Sheet Metal Roof Systems available

• Chimney flashings done right, and or chimney repairs including installations of chimney crickets or saddle's 

• Complete Roofing Ventilation upgrades and installations. Full Ridge vents, attic fans, power fans, turbines and  turtle vents as needed to properly vent your entire attic

Hardie Siding Installations: The 50 year Siding!

Fiber cement siding products have the look and character of natural wood. Fiber cement is lightweight and resilient, resistant to water, fire, UV rays, salt spray and termites. It will not crack, rot, or delaminate. It is manufactured without asbestos, fiberglass, or formaldehyde. Fiber cement holds paint up to three times longer than wood. As a premium alternative to vinyl, consider fiber cement for your new home or residing job. Please visit our siding site::::

Dallas Siding Contractors for all your siding replacement needs. Installing Vinyl Siding, Hardie Siding, Cedar Siding and Veneer Stone Siding. www.dallas-siding-contractors.com 

Commercial Roofing Systems:

• Complete new commercial roof installations and renovations

• Commercial property roof management programs

• Industrial Roofing systems, replacement, repairs, coatings, renovations

• Flat roofs: APP 160 / APP 180 Granulated. Isso insulations tapered systems,  drains, designs with coatings, elastomeric, epoxy or aluminum coatings. Cool roofing systems

• EPDM repairs and or replacement, suggested coatings. Bar and tape systems or fully adhered

• TPO repairs and or replacement, coatings

• BUR, 2-3-4 ply systems, removed, replaced not maintenance friendly

• Tapered insulation: 1/4, 1/2" sloped isso for drainage

• New Drains: Repairs, design and installations

• Breather Vents commercial roofing ventilation systems

• Cool Roof Systems: Elastomeric coatings, cool roof coatings, dura-seal, applied coatings