| Our
copper bay windows are done according to true
historical double lock standards. Every copper bay
window we have seen in Dallas is done with just 1
fold and a rivet or screw to hold the seam
together?
We
custom fabricate our copper bay windows on site
using 3x8 sheets of hard solid copper. We
fabricate our seams to a double lock standing
seam. Our copper bay windows are lifetime products
and we offer life time warranties on all copper
bay windows we install. |
|
Copper
bay windows by LR Home Solutions LLC
When
doing a copper bay window. We suggest using 16oz soft
copper sheets. Each piece should be manufactured on site
to an exact fit
A
true copper double lock standing seam is manufactured by
hand using a hand angle iron that stands 1 1/4" on
one side and 1" on the other side. Allowing the
craftsmen to use the iron to make the bends in the seam.
Bending 1/4" over the pan next to it and folding
again using the 1" side to create the second fold.
The seam is then beat tight with the iron and hammer. This
is a true double lock copper stand seam bay window done
according to SMCA (sheet metal contractors associations)
All
corners are folded using hand benders. Pin holes are then
soldered using flux and solder
Copper
Bay Window Prices:
Standard
installation prices for a copper bay window as seen above
shouldn't exceed 950.00 per bay window
That's
based on 2 sheets of 3x8 copper. Brick copper counter
flashings installed add an additional sheet of copper and
additional labor costs
Arched
or curved bay windows additional
Larger
copper bay windows exceeding 2 sheets of copper are
estimated on site
An
alternative choice to a copper bay window as seen below
ALUMINUM
BAY WINDOW ROOF
ALUMINUM
ROOF BAY WINDOW
We
pride ourselves on our abilities to stand above the rest.
With the problems most are having here in Dallas with
shingle roofing over their bay windows due to the amount
of pieces in general needed to complete the bay window. We
have chosen to use standard stock sheets of aluminum to
manufacture on site an alternative to the hundreds of
pieces it takes to do a bay window in shingles
As
seen above this bay window only needed 10 shown panels to
complete this bay window. Less pieces means less chance
for wind blown rains to get to the bay window and leak
into the house
When
copper is not "appropriate for the neighborhood"
or when its a bay window located on the back of the house.
We suggest an Aluminum Bay window instead
Aluminum
Bay Window Costs:
Average
price for our aluminum bay window roof system is $450.00
installed. Aluminum included
Standard
Installation:
Remove
existing shingle roof and associated flashings
Install
weather guard rain protector directly on plywood
Install
Aluminum panels
Single
lock seem with crimped connectors as needed
Seal
corners
New
counter flashings, cut into new riglets over the existing
flashing height to eliminate any existing mess left by the
previous installation
|
